Thursday, August 28, 2014

Stencil Girl Meets VLVS!





Hello Again Everyone! 
Today is my day in the super fun VLVS and Stencil Girl Blog Hop!!!!!

Today's Stops are: 
Tera Callihan <----- you are here

Stamps Used:

Banksy Achieve Greatness 1 1/2 x 2 1/4


Other supplies:
You will need stencils. (Stencils can be bought HERE... prepare to drool over the AWESOME selection!)
Art Journal, Acrylic Paint (i used cheap paint in red, white and turquoise), sharpie paint marker (black), magazine pages, and Washi Tape


Grand Prize will go to 2 lucky people. They will win what is pictured below from StencilGirl and VivaLasVegaStamps. ALL comments on ALL blogs are elgible to be entered for the entire week.One comment per blog please. Giveaway will close Sunday, August 31st @ 11:59PM Central. Winners will be announced on Tuesday, September 2nd.


Today I started with a page in my art Journal that i had added a magazine page to previously. I gave the page a light white wash, then after it dried I outlined the details on the girl. I also painted the background around the girl Turquoise and added a touch of red to her lips. 


Next I started with my 1st stencil "Twist Lattice" and added some fun geometric shapes with red paint. I also added some skull washi tape with a wash of red paint to pull it in as well. (let paint dry completely before moving on)


From there I added the film strip washi tape and the tiny camera washi tape 
(I have been doing some photo shots lately so it is relevant to me) 

Next I used the "Inside Out stencil" for the word Secret, Inside, and for the edging details on the pages. I stamped around the page as well as writing a few words in. This is a perfect base page for me now so that I can fill with journaling and write when the mood strikes :-D
 I do love having pages pre-arted up!!  
Here Are some more photo's and Details on the GIVE-AWAY below!!






Thank you all for Hopping to my blog, don't forget to check out the other blogs if you are starting here : D






Saturday, August 23, 2014

The Doctor is In!

WARNING: If you are easily offended or don't like strange or creepy themes this card may not be for you

Hello again everyone!!! It's me again, today I am going to share the card I created for the VLVS Shaped Halloween Card swap on the Facebook VLVS Groupies page If you are not a member I recommend joining, So much fun and inspiration going on over there!!! 


Stamps Used: 

Coffee Ring Stain 2 3/4 x 2 1/4

Other Supplies-- 
A4 card cut into a file folder shape
Ink- Archival Black, Distress ink- Frayed Burlap, scattered straw, black soot, brick red
scrap paper (for making masks)
Marker Sprayer for distressing
make-up sponge or distress tool for additional shading
Tim Holtz Tiny Attacher/stapler 

Sizzix Movers & Shapers Die - Tag & Tie 

Scraps of orange paper (for the circles on the tag)cord/string
Black marker (fine point for writing and drawing lines) 
water spritzer optional
score tool/board optional
Scissors 
File folder to trace top of (or you can wing it! lol) 
Glossy Accents (or Glue of choice) 

To Begin cut your card Base - 8.5x 5.5 score or fold at 4.5 This gives you the long and short side of your file. On the long side trace the tab of your file , then on the short side trace the inward dip (make sure they are on the same side so it looks right). Cut out your base and admire ho cute this mini file is!

I start by stamping/drawing all of my masked off images in archival black ink: the Doctor was stamped then stamped on scrap paper to create a "mask" to protect it while i work, For the Rx pad, I traced my acrylic stamping block with a black marker leaving one corner open so i could draw it to look like folded paper. (You can also trace a post it not in your size of choice and you will save yourself from cutting out a "mask" for this.) I then traced it again on scrap paper to create a mask (and just folded the corner of the mask to match what i drew rather than guessing)



Next, stamp the skull, Rx pad with the Rx label from the Rx stamp (I cup mine out, so i can use it separate and still use the cute note box on other pieces : D ), and using the Type letters from plate 1430  I stamped out the J. Kevorkian (AKA "Dr. Death" get it a Rx for death, from Dr. Death himself... hehe) The Tiny #'s are numbers from the corners of the Plates of rubber : P Also stamp the patient (aka pt.) Name that you would like... Mine is patient X1446

Now, place both of your "mask" on to cover up your focal pieces. Get out your scattered straw ink and a makeup sponge and add color over the entire front of the card (careful not to move your masks). Set this aside to dry while you do this next step...




On a separate piece of paper stamp the "Radioactive" in red , then cut it out to look like a rectangle medical sticker "chart note"... Using the black soot distress the edge so that this will pop against the background! Also While you have the red out stamp the "Do Not Read This!" on the file tab
  (After All this is a confidential patient file!) 
Attach the radioactive "sticker" using your tiny attacher/stapler


Back  to the file, Sporadically stamp the dictionary page stamp to distress the file....Remove your masks (admire your clean work...now we are going to grunge it up more!) Using your frayed burlap distress ink, ink up the coffee ring stamp (I spritzed my stamp with water at this point to give it the wet/watery coffee look but you don't have too) then stamped as if coffee had sat on the file and Rx script

Take the marker spritzer with the black soot Distress marker and add some grunge all over where you feel it's to "clean" and bright!  


Cut out the tab in plain card stock (bread tie looking thing) then 2 of the reinforcing circles in orange .  Distress the pieces with the frayed burlap, then glue the circles on the front and back to reinforce the piece to look like the "Toe Tag". Tie yours cord around it and attach with the tiny attacher

Enjoy your spooktacular work!!!
Below I have a few more views : P







Monday, August 11, 2014

A Vintage Game Of Tag

Hello, Its Me Tera here again with another fun project to share that I created for Viva Las VegaStamps! 
Today I am sharing a fun Vintage themed Tag that I created. 

I started  with a base of patterned paper by Prima, and a main focal image that I wanted to build around. 
(From here I really got into the swing of everything and forgot to take progress shots as I went so bare with me while I try to explain my madness :-D) 

 I started by stamping Chicken Wire 3 3/4 x 4 1/2 randomly on the background in frayed burlap. 

Next I stamped the Big Ben 1 3/4 x 4 1/4 on the left side in VersaFine Sepia.
 I also inked and distressed around the edges in various shades of browns.  On a separate sheet of paper I stamped the Bearded Man 2 1/4 x 2 1/4  in verafine black and distressed it with versafine sepia. I also stamped the #7 from Plate 1430  then embossed it with black embossing powder before i cut it out and distressed it.  At the top right I stamped Butterfly Specimens 1 1/2 x 4 1/2 then also embossed it in black. To finish things off I added some film strip by Tim Holtz to the side, as well as some random spots of Tim Holtz washi tape. I popped up the 2 pieces on pop-dots, then embellished with UmWow Studio Gears

Below are a few more detail pictures :-D






Thursday, August 7, 2014

Exciting News!!!

Hello Everyone!
I have some super exciting news!!!!

I have been invited to be a part of the 100 Proof Press Rubber Stamps Design Team!!! 
I am so very excited!! 
 It has been killing me not to share this news before this!!! 
Now that it is Officially posted on their blog I can share my 1st official project with you!!! 
(My intro can be read HERE)


I hope you will hop over there to show your love also, they have such a wonderful assortment of stamps so if you haven't checked them out yet you really should!!!
Stamps used for this project:

Thank you all for stopping to look today! I hope you are inspired to create something fun today!