Yuletide greetings

 Hello Crafty Friends!

Are you ready for a new challenge? The theme of the new Frilly Funkie challenge is "Yuletide

I chose to create something fun and simple, it'd that time of year where I'm in need of cards, so of course that's what I went for. 

I used several of the new Tim Holtz idea-ology goodies.

(paper, ephemera, and layers)

To spice that up I used frosted crystal embossing powder and gold embossing powder.

It's hard to capture the texture in photos, but you can see it somewhat. 

Products Used:

Ephemera

Layers

Christmas Paper (Backdrops)

Frosted Crystal embossing powder

Gold Embossing Powder

6 simple cards with only 1 stamp set

 

 Hello Crafty Friends!

Today is my Saturday showcase day for The Funkie and Frilly challenge blog.

Today I wanted to share a fun challenge I gave myself. I challenged myself to use only 1 stamp set to create 6 simple cards that can be good for any occasion.  I chose to use the Tim Holtz Set - CMS385 "Into the woods".  I wanted a woodsy look that could be good for fall, Christmas, or masculine cards. 

3 of the cards are A2, one just a bit shorter than A2, a slimline card, and one that's about 2/3s the size of an A2 (made from the scrap from cutting the slimline card).

A simple frame card

 (you could easily switch out any of the animals to the bear or the fox from the set).

Simple and woodsy.

Woodsy with a splash of color.

A touch of plaid for simple color.

A simple and easy wreath card. 

(This could also be a bird nest. I should have done a touch less stenciling for my preferred look).

My favorite of all the cards, and yet the simplest!

What do you think of these cards?

This stamp set could easily make so many more simple cards, or awesome elaborate ones!!

Products Used: 

Stamp set- Tim Holtz Into the woods

Inks:

    Distress oxides- vintage photo, frayed burlap, walnut stain, forest moss, crackling campfire, candied apple, and black soot

    Original Distress inks- scattered straw, walnut stain

    Other inks- Delicata golden glitz, Embossing ink

Embossing powders- black and red

Tim Holtz layering stencil - THS021 Speckles

Tim Holtz small talk stickers

plaid scrapbook paper

blending tool

Die-na-mite Halloween card

  Hello Again Crafty Friends!!!

It's that time again!!! Today starts the new challenge with the Funkie Junkie Boutique and I'm the Host!

Join us over on the Frilly and Funkie challenge blog HERE.

The Theme is "Die-na-mite" 

Dies can make a simple or boring project extra mighty... I want you to use your dies to make a project! They can be your main focus, or work in the background to make your project a little extra mighty.  

For my project, I chose to make a Halloween card. This year I am going to try really hard to get a few out to some family and a few special mail art friends I have been super neglecting for a while. 

To start I cut out the small pumpkin from the new Tim Holtz- "Pumpkin Patch, Colorize" die set. I added some of the new mica sprays to my black layer, and my top orange layer. I also lightly inked with vintage photo distress ink on the edges of each piece. To glue everything together I used collage medium (my go to matte glue).

Next, I went through my background box, and found a leafy background I had created using various distress inks and oxides with a Dylusions stencil (and water flicks of course).  I also had this wood frame sitting on my desk from another Idea that hadn't worked out like I wanted. I thought it looked so perfect with the leaves so I decided to add it (It was created using a 3D wood grain embossing folder on brown cardstock, then using a rectangle nesting die to cut out the center to create a frame). 

From here, I got in the groove, and totally forgot to take progress photos, but I stamped the "wishing you a spooky Halloween" from the "Monstrous" stamp set by Tim Holtz in black soot- Archival ink (since I am stamping over oxides I used my stamping tool to stamp it several times so that the color would really pop).

I also used white heat embossing with a spider web stamp from the "Tangled Webs" stamp set by Tim Holtz. 

The tiny bats I added were from the die set "Vault series: Halloween 2021" (Yes the pumpkin patch set comes with bats, but for whatever reason I liked these tiny bats better. lol).

To add to the look of the frame I added the screw heads to the corners of the frame. I thought this gave a little extra something to the look. I also added grit paste to the screws and the area around them for a worn texture (I used the new Halloween grit paste, but since I ended up covering it up any of the translucent grit paste would have worked). 

Once that was dry, I used distress crayons to make the wood grain pop more, and to add a bit of rusty/grunginess around the screws.  

Last to finish off the pumpkins, I used a white gel pen to add random highlights to the pumpkin so that it would really pop off of the card (which was adhered with pop-dots to give it dimension).

Products Used:

Dies: Pumpkin Patch, Vault series: Halloween 2021, Rectangle nesting die (I used an old retired set, but any would work).

Grit Paste (I used Tombstone, but THIS will work too)

Tim Holtz 3D wood grain embossing folder

Stamps: Tangled Webs, Monstrous

Inks: Distress inks, Distress Oxides, Black Soot Archival, Embossing ink pad

Prima Junk Yard Findings (these are old so not sure if they still make them) You can also use Hardware Heads by Tim Holtz (my usual go to)

White Embossing powder

Distress Crayons (sets 7 & 10 are perfect for rust, and #3 is of course needed for the white highlights)

Tim Holtz Halloween Mica Sprays -Set 1

Collage Medium

Dylusions Stencil - Leaves 

De-stressing with distressing

 Hello Again Crafty Friends!!!

It's that time again!!! Today starts the new challenge with the Funkie Junkie Boutique and I'm the Host!

Join us over on the Frilly and Funkie challenge blog HERE.

The new challenge is called "De-stressing with distressing"

The object is share a project with your favorite ways of distressing.

 My project was inspired by Stacy Hutchinson. you can see her project HERE.

I started with a smaller vignette box and a piece of paper from the Tim Holtz backdrops. I cute my paper to be able to cover all of the outer sides. ( I am still considering doing a 2nd project on the inside at a later date.) 

I cut my port hole and bits using the Sizzix Bigz die "Steampunk Parts". I used a combination of the old Distress powders, Distress stains, grit paste, and Distress crayons to get the rusty look. For the red part I used "rouge" Zing embossing powder.

(Close up for detail)

You can see I flicked off a lot of the red embossing powder before heating for a more weathered look. then the stains and crayons filled in the gaps. The image is one of the Tim Holtz "found relatives". 

Since I loved how Stacy stitched around her pieces, I chose to do the same before gluing anything to my vignette box. 

After all of my paper pieces were glued on using Distress collage medium, I then added my crackle pastes, and decorative elements such as the "be brave". When everything was dry I used Distress inks, stains, and crayons to add a bit of grunge.

I also added a heat embossed fish to the front with white embossing powder and the stamp set "Sealife" by Tim Holtz. The string bits were extra left over bits from stitching the panels, and I liked the look of them so I also added them. 

(Here's some of the side details)

(The other side...

I chose to keep both simple since I may add to the inside still and if so not sure if I may choose to carry whatever onto the outer sides.)

Well, I hope you like this little display piece, and don't forget to check out the AMAZING piece I was inspired by HERE. 

(Really, you should make sure you follow Stacy Hutchinson if you don't already! Her work is outstanding!!)

Products Used: 

Tim Holtz Backdrops Papers 

Collage Medium 

Opaque crackle paste 

Grit Paste 

Palette Knife 

Found Relatives (the new sets may not have this fella. Mine was from an old set) 

Quote Chips 

Paper Distresser 

Distress Crayons Set #3  

Walnut Spray Stain  

Vintage Photo Spray Stain 

Picket fence Spray stain (for splatters) 

Inks: Walnut stain, Vintage Photo 

Red Embossing powder 

Heat Tool 

Stamp Set CMS 304 "SeaLife" 

Steampunk Parts Bigz Die 

Feeling like Royalty

Hello Again Crafty Friends!!

Are you ready for a new Funkie Junkie challenge?

Today starts the new challenge "I'm feeling like Royalty" with our host Suzz.

Join us HERE for a peek at more inspiration and to play

I started by building up layers on a card base.

I used distress ink in walnut stain ink on the top 2 layers.

To create the top layers I used a Tim Holtz paper doll, one of the sets of transparent wings from Tim Holtz, and created a crown from a scrap of gold paper from Tim Holtz (which I embossed with the typeface 3d embossing folder). The gold belt was created with gold embossing powder. I used a retired Tim Holtz die to create my pink oval base from kraft core paper. Then, I hand cut a black boarder to add a base. 

(also I colored my paper doll with distress ink (dusty concord-then wiped to lighten) and alcohol markers (for rosy cheeks)

I used distress collage medium to glue everything together.

Next, I layered some of my Tim Holtz chipboard pieces.

I used pop dots, to add another layer of flowers, and more pop dots under my base.

The base layer for under my topper was created with the Tim Holtz basket weave 3d embossing folder.

I used, rustic wilderness distress ink to add depth. I spritzed everything with water to lighten it up and get it blended out.

I added the Tim Holtz foiled stickers to finish everything off.

I hope you enjoy this card as much as I do.

Products Used:

Collage Medium (my go to glue along with glossy accents)

Tim Holtz-Paper Dolls

Tim Holtz- 3D embossing folder typewriter

Tim Holtz embossing folder intertwined

Tim Holtz transparent wings

Tim Holtz Metallic Sticker Book

Distress ink -Rustic Wilderness , Dusty Concord

Tim Holtz -Botanical layers die cuts 

(I think they are retired but you can still get the Field notes snippets, which I also have and love!)

Gold Embossing powder

Tim Holtz Kraft stock (I think the multi pack I used is retired)

(You can get the newer kraft stock HERE, both plain and the metallics)

 

Exciting News and a Tutorial

Hello Crafty Friends!

Today I can finally announce that I made the Funkie Junkie Boutique Design Team!!!

That means I will finally be back to blogging at least every other Wednesday! If you aren't familiar with The Funkie Junkie Boutique you should definitely check it out. She is a small online store, but she also host bi-weekly challenges for inspiration and to help with creative mojo. (I know I have been in a creative funk, so that's one of the reasons I applied to get my creative juices moving and in a different direction)

(plus you know I love Holtzy and grungy goodness which is a lot of what the "Frilly and Funkie" challenge blog is all about. There will be lots of shabby chic and grungy goodness <3 

Check out the blog HERE

The current challenge is "Anything Goes" if you want to play along with me (HERE)

(be sure too look at the amazing inspiration by my other team mates too... so much yumminess

Ok, on to my tag tutorial...

This year I am working on my perennial pollinator garden. Mom and I went Saturday to get some flowers, and just hang out. (Boy was it hot!!) Anyhow that's what inspired this butterfly tag.

I started by inking some cardstock with some distress oxide inks in - crackling campfire, salvaged patina, and fossilized amber. I die cut the tag from that paper then lightly inked with a little walnut stain distress ink. I also cut out a tag slightly bigger to layer behind it.

Next, I used the text stamp from CMS410 "Specimen" and white embossing powder

For the frame, I used the 3D impresslit I cut it out of some of Tim's kraft core paper. I then lightly sanded the high spots. I added a little walnut stain ink on the high spots, then used an embossing dauber and clear powder. After it was heated I used the walnut stain crayon to add more grunge.

I used my sewing machine to stitch the 2 tags together.  Then I used distress collage medium to glue down my frame. I then used my tiny attacher to attach the "transparent wings", then I poked holes to wire my pen nib.

(I should have done all this before adding the bottom tag, but oh well)

Next, I added a quote from one of Tim Holtz's gold foiled sets. I sanded the edges and glued them on scraps of black paper.

(loving all this distressed goodness)

I then began to work on the ribbon.

Above you can see my 1st set of inking

I wanted it darker, so I inked again with the 2 above.

Also when I had everything finished I used black soot stain to add a few extra flicks of ink for added grunge.

I hope you all enjoy this tag as much as I do!!!

Products Used:

Stains: Black Soot, Faded Jeans

Crackling campfire oxide, salvaged patina oxide, and fossilized amber oxide

Inks: Mini Distress ink pads, Faded Jeans Distress Oxide, Chipped Sapphire 

Floral Frame

Metallic sticker book

Embossing Dauber, Embossing Pad, clear embossing powder, white embossing powder

Ideology pen nib (they no longer sell the one I used, but this has one)

Transparent wings

Kraft Core Paper (they also no longer sell the pad I used, this is Tim's new version)