De-stressing with distressing

 Hello Again Crafty Friends!!!

It's that time again!!! Today starts the new challenge with the Funkie Junkie Boutique and I'm the Host!

Join us over on the Frilly and Funkie challenge blog HERE.

The new challenge is called "De-stressing with distressing"

The object is share a project with your favorite ways of distressing.

 My project was inspired by Stacy Hutchinson. you can see her project HERE.

I started with a smaller vignette box and a piece of paper from the Tim Holtz backdrops. I cute my paper to be able to cover all of the outer sides. ( I am still considering doing a 2nd project on the inside at a later date.) 

I cut my port hole and bits using the Sizzix Bigz die "Steampunk Parts". I used a combination of the old Distress powders, Distress stains, grit paste, and Distress crayons to get the rusty look. For the red part I used "rouge" Zing embossing powder.

(Close up for detail)

You can see I flicked off a lot of the red embossing powder before heating for a more weathered look. then the stains and crayons filled in the gaps. The image is one of the Tim Holtz "found relatives". 

Since I loved how Stacy stitched around her pieces, I chose to do the same before gluing anything to my vignette box. 

After all of my paper pieces were glued on using Distress collage medium, I then added my crackle pastes, and decorative elements such as the "be brave". When everything was dry I used Distress inks, stains, and crayons to add a bit of grunge.

I also added a heat embossed fish to the front with white embossing powder and the stamp set "Sealife" by Tim Holtz. The string bits were extra left over bits from stitching the panels, and I liked the look of them so I also added them. 

(Here's some of the side details)

(The other side...

I chose to keep both simple since I may add to the inside still and if so not sure if I may choose to carry whatever onto the outer sides.)

Well, I hope you like this little display piece, and don't forget to check out the AMAZING piece I was inspired by HERE. 

(Really, you should make sure you follow Stacy Hutchinson if you don't already! Her work is outstanding!!)

Products Used: 

Tim Holtz Backdrops Papers 

Collage Medium 

Opaque crackle paste 

Grit Paste 

Palette Knife 

Found Relatives (the new sets may not have this fella. Mine was from an old set) 

Quote Chips 

Paper Distresser 

Distress Crayons Set #3  

Walnut Spray Stain  

Vintage Photo Spray Stain 

Picket fence Spray stain (for splatters) 

Inks: Walnut stain, Vintage Photo 

Red Embossing powder 

Heat Tool 

Stamp Set CMS 304 "SeaLife" 

Steampunk Parts Bigz Die 

Best Day Ever

 Hello Again Crafty Friends!!!

It's that time again!!! Today starts the new challenge with the Funkie Junkie Boutique.

Join us over on the frilly and funkie challenge blog HERE.

The new challenge is called "HOT HOT HOT"... 

some places are getting up to those triple digits, and we want you to work in 3's. 

(use 3 of an item, 3 colors, etc.)

For my card, I used 3 layers, 3 flowers, and 3 of each type of leaf. 

I started by cutting out all of my flower and leaf pieces from some of my Tim Holtz Kraft core cardstock. I then lightly sanded all of the pieces to expose some of the core for a more distressed look.

I used distress collage medium to glue everything together then used various distress inks and oxides to add extra color. (I did add walnut stain distress ink to all of the edges before assembling) 

The background paper I added was also from the Tim Holtz backdrops. I used walnut stain distress ink around the edges then added some white stitching.

(detail of the flower layers)

I used kraft heavy cardstock for my card base, and the Tim Holtz black kraft core paper for my 2nd layer. (lightly sanded of course)

Next, I added some crackle paste in 3 different areas.

Once, it dried I used the walnut stain distress crayon to add detail and grunge to all the cracks, as well as along the stitching.

To finish the card off I added the "Best Day Ever" quote sticker over a scrap of gold, then mounted with pop dots.

Thank you for visiting! 

I hope you enjoyed this card.

Products Used:

Kraft Heavy Stock

Metallic Kraft stock

Kraft stock Neutral (I used the old textured ones, but this is similar colors)

Kraft stock cool (also similar colors.. you could also use ink on watercolor)

Tim Holtz Backdrops Papers

Collage Medium

Opaque crackle paste

Palette Knife

Paper Distresser

Tim Holtz Metallic sticker book

Brushstroke Flowers #3

Distress Crayons Set #3 (I used walnut stain from this)

Hickory Smoke spray stain (for splatters)

Picket fence Spray stain (for splatters)

Inks: Walnut stain, Speckled Egg, Speckled egg Oxide, Crackling campfire, Rustic wilderness, Mustard Seed Oxide

Gelly Roll (white gel pen #10)

Tim Holtz detail water brush 

Memory's of a time gone by

 Hello Again Crafty Friends!

It's that time again! Time for a new Funkie Junkie Boutique Challenge

The theme is all about "Time" for this one

Check out the challenge details HERE if you want to play along. 

I chose to create a vignette box of captured memories for my piece. 

Here you can see how the distressing began with a lot of alcohol ink, grit paste, crackle paste, and distress crayons!

Close up so you can see how I used mushroom alcohol ink on the pocket watch, pen nib, and chip quote. You can also see the grit and crackle paste I used. I used mustard seed paint on the star, and collage medium to glue it to that milk tab. 

Close up of the 3 D embossed pieces I added to the inside. I used black soot paint for the distressing on these. This was the crackle before I added the crayon. 

***

(I did use collage medium over the crackle after it dried, because it did not want to stick to the wood)

I blended with a paintbrush and a little water after scribbling on the top of the crackle

I seriously love the tiny hardware heads

Thank you for checking everything out! 

I hope you feel inspired and will join us too!!

Products used:

Collage Medium (my go to glue along with glossy accents)

Tim Holtz-Paper Dolls

Distress Crayon from set 3

Mushroom Alcohol Ink

Collector layers

Chip Quotes (mine was the older version if you have those)

Hardware Heads

Pocket Watch

Vignette Box

Milk caps

Metallic kraftstock  (I used Gold)

Distress paint (I used Black Soot and Mustered Seed)

Pen Nib (Mine is and old one, but this has it too)

Grit Paste

Crackle Paste

Typewriter Embossing Folder

Circuit Embossing Folder

Feeling like Royalty

Hello Again Crafty Friends!!

Are you ready for a new Funkie Junkie challenge?

Today starts the new challenge "I'm feeling like Royalty" with our host Suzz.

Join us HERE for a peek at more inspiration and to play

I started by building up layers on a card base.

I used distress ink in walnut stain ink on the top 2 layers.

To create the top layers I used a Tim Holtz paper doll, one of the sets of transparent wings from Tim Holtz, and created a crown from a scrap of gold paper from Tim Holtz (which I embossed with the typeface 3d embossing folder). The gold belt was created with gold embossing powder. I used a retired Tim Holtz die to create my pink oval base from kraft core paper. Then, I hand cut a black boarder to add a base. 

(also I colored my paper doll with distress ink (dusty concord-then wiped to lighten) and alcohol markers (for rosy cheeks)

I used distress collage medium to glue everything together.

Next, I layered some of my Tim Holtz chipboard pieces.

I used pop dots, to add another layer of flowers, and more pop dots under my base.

The base layer for under my topper was created with the Tim Holtz basket weave 3d embossing folder.

I used, rustic wilderness distress ink to add depth. I spritzed everything with water to lighten it up and get it blended out.

I added the Tim Holtz foiled stickers to finish everything off.

I hope you enjoy this card as much as I do.

Products Used:

Collage Medium (my go to glue along with glossy accents)

Tim Holtz-Paper Dolls

Tim Holtz- 3D embossing folder typewriter

Tim Holtz embossing folder intertwined

Tim Holtz transparent wings

Tim Holtz Metallic Sticker Book

Distress ink -Rustic Wilderness , Dusty Concord

Tim Holtz -Botanical layers die cuts 

(I think they are retired but you can still get the Field notes snippets, which I also have and love!)

Gold Embossing powder

Tim Holtz Kraft stock (I think the multi pack I used is retired)

(You can get the newer kraft stock HERE, both plain and the metallics)

 

Exciting News and a Tutorial

Hello Crafty Friends!

Today I can finally announce that I made the Funkie Junkie Boutique Design Team!!!

That means I will finally be back to blogging at least every other Wednesday! If you aren't familiar with The Funkie Junkie Boutique you should definitely check it out. She is a small online store, but she also host bi-weekly challenges for inspiration and to help with creative mojo. (I know I have been in a creative funk, so that's one of the reasons I applied to get my creative juices moving and in a different direction)

(plus you know I love Holtzy and grungy goodness which is a lot of what the "Frilly and Funkie" challenge blog is all about. There will be lots of shabby chic and grungy goodness <3 

Check out the blog HERE

The current challenge is "Anything Goes" if you want to play along with me (HERE)

(be sure too look at the amazing inspiration by my other team mates too... so much yumminess

Ok, on to my tag tutorial...

This year I am working on my perennial pollinator garden. Mom and I went Saturday to get some flowers, and just hang out. (Boy was it hot!!) Anyhow that's what inspired this butterfly tag.

I started by inking some cardstock with some distress oxide inks in - crackling campfire, salvaged patina, and fossilized amber. I die cut the tag from that paper then lightly inked with a little walnut stain distress ink. I also cut out a tag slightly bigger to layer behind it.

Next, I used the text stamp from CMS410 "Specimen" and white embossing powder

For the frame, I used the 3D impresslit I cut it out of some of Tim's kraft core paper. I then lightly sanded the high spots. I added a little walnut stain ink on the high spots, then used an embossing dauber and clear powder. After it was heated I used the walnut stain crayon to add more grunge.

I used my sewing machine to stitch the 2 tags together.  Then I used distress collage medium to glue down my frame. I then used my tiny attacher to attach the "transparent wings", then I poked holes to wire my pen nib.

(I should have done all this before adding the bottom tag, but oh well)

Next, I added a quote from one of Tim Holtz's gold foiled sets. I sanded the edges and glued them on scraps of black paper.

(loving all this distressed goodness)

I then began to work on the ribbon.

Above you can see my 1st set of inking

I wanted it darker, so I inked again with the 2 above.

Also when I had everything finished I used black soot stain to add a few extra flicks of ink for added grunge.

I hope you all enjoy this tag as much as I do!!!

Products Used:

Stains: Black Soot, Faded Jeans

Crackling campfire oxide, salvaged patina oxide, and fossilized amber oxide

Inks: Mini Distress ink pads, Faded Jeans Distress Oxide, Chipped Sapphire 

Floral Frame

Metallic sticker book

Embossing Dauber, Embossing Pad, clear embossing powder, white embossing powder

Ideology pen nib (they no longer sell the one I used, but this has one)

Transparent wings

Kraft Core Paper (they also no longer sell the pad I used, this is Tim's new version)

Tags and Tabs

 Hello Again Crafty Friends!

Been working on some super fun field guide/entomology style tags... 
But not just any tags... pocket tags!!! 

(I got the inspiration from another blogger HERE) 

To create my pocket tags I created my own cut file in brother canvas workspace (for the scanNcut machine). You can easily do this with dies or punches too. 

I used paper from graphic 45 (Natures sketchbook), some Tim Holtz remnant rubs, Tim Holtz tiny clips, and some Tim Holtz ephemera and snippets... I used a few other bits I could find in my stash. 

(Also I made these before my sewing machine broke... so hopefully I'll get to make some more soon. I just love that the stitching adds that extra something... Although I found that stitching the inner tag does make it harder to slide in and out... In the future I may just use my stitching stamps on the inner tags)

Enjoy the detail pictures below. 

Thank you for visiting!! 

Stay Crafty!